View MADP000015-000030_4468414.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Packaged PIN Diodes
RoHS Compliant Features
High Power Fast Speed Voltage Ratings to 1500 Volts Wide Selection of Carrier Lifetimes Wide Selection of Capacitances Assortment of Packages Styles Available Screened for Military Applications Rev V.9
Maximum Power Dissipation
Cathode Heatsink Packages 30,31,32,36,43,94,111,120, 150,255 258,296,1072,1079 Leaded Packages @+25C 144, 186, 276,1088 Surface Mount Package +25C 1056 Pdiss = T (max Operating)-25C Thermal Resistance
Pdiss = 250mW
Description and Applications
M/A-COM's broad line of packaged PIN diodes encompasses a comprehensive range of electrical characteristics and package outlines. This diverse union of semiconductor technology and chip packaging gives considerable flexibility to the circuit designer. The fast switching series of packaged PIN diodes utilize a thin I-region and silicon oxide or glass passivated chips which provide for low leakage currents and low insertion loss. Using in process control monitors to regulate wafer fabrication parameters these devices achieve consistent performance in control circuit applications. The high voltage product line of packaged PIN diodes employs M/A-COM's unique CERMACHIP(R) passivation process which provides for a hard glass encapsulation that hermetically seals the active area of the chip. These (R) packaged CERMACHIP PIN diodes are ideally suited for use in high power applications where high RF voltages are present. The diode chips are bonded into sealed ceramic packages that are designed for the most stringent electrical and environmental conditions. A wide choice of packages are available which can be mounted into a variety of microwave and RF circuit media. The Packaged PIN Diodes series are designed to have a high inherent reliability and may be ordered screened to meet many MIL-STD reliability levels.
Pdiss = 300mW
Co-Axial Packages
31,32,94
36
30, 296
120,255
Leaded/Surface Mount Packages
Thru Hole
276
1088
1072,1079
186
1056
144
Threaded Packages
Absolute Maximum Ratings
Parameter Voltage Operating Temperature Storage Temperature Operating and Storage (Case Style 1088)
1
Absolution Max. As Specified in Table - 65C to +175C - 65C to +200C - 65C to +125C
150 111 43 258
Unpackaged Die
1. Operation beyond any one of the above conditions may cause permanent damage to the device.
Specifications subject to change without prior notification. 131,132.134 , 212
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant 35V to 250V Fast Switching PIN Diodes Specifications (TAMB = +25C)
Minimum Reverse Voltage1 @ IR <10A Volts 100 100 200 250
( Unless otherwise specified )
( Unless otherwise
Rev V.9
specified )
Part Number
Maximum Capacitance CT @ -10V f = 1MHz pF 0.25 0.35 0.35 0.40
2
Maximum Series Res. RS @ 10mA f = 500MHz 2.50 1.50 1.50 0.60
3
Maximum Thermal Resistance
Nominal Characteristics I-Region Width Microns M 12 12 20 30
Carrier Lifetime4 C/W 60 30 30 20 nS 60 100 200 1000
TRR5 nS 5 20 60 100
MA4P202-120 MA4P203-30 MA4P303-32 MA4P404-30 Notes:
1. 2. 3. 4. 5.
The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A At VR = -50V Rs measured at IF = +50mA, f = 100MHz. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA Nominal TRR (reverse recovery time) specified with diode biased at IF = +20mA , IREV = -200mA.
Package Options
Chip
30
31,32, 94
111
120, 255
186
276
1088
1072
131,132
1056
Package dimensions can be found on the M/A-COM website at http://www.macom.com/TechApps/OutlineDrawings.asp
35V to 500V MELF General Purpose Switching Diodes Specifications (TAMB = +25C)
Minimum Reverse Voltage2 IR <10A Volts 35 200 200 200 200 500
(Unless otherwise specified)
Part Number
1
Maximum Capacitance CT @10V f = 1MHz pF 1.2 0.5 1.5 0.5 0.8 1.54
Maximum Series Res. RS @10mA f = 100MHz 0.5 3.0 0.6@50mA 6.0 25.0 0.25@100mA
CW Power Dissipation Rating
Nominal Characteristics Typical IF When RS = 75 mA -- -- -- 0.30-0.60 1.20-2.40 -- Carrier Lifetime3 S 0.3 1.5 3.0 2.0 6.0 3.0 I-Region Width mils 0.4 2.0 3.0 4.0 14.0 2.0
MA4PH235-1072T MA4PH236-1072T MA4PH237-1079T MA4PH238-1072T MA4PH239-1079T MADP-000234-10720T
Watts 1.0 1.0 2.0 1.0 2.0 5.0
Notes: 1. Only available in case styles indicated. 2. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A. 3. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA 4. Ct tested at 100V
Case Styles 1072, 1079
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant 500V PIN Diodes Specifications (TAMB = +25C)
Minimum Reverse Voltage1 IR <10A Volts MA4P504-30 MADP000015-000030 MA4P506-30
3
Rev V.9
Part Number
Maximum Capacitance CT @100V f = 1 MHz pF 0.40 0.55 0.90
Maximum Series Resistance RS @100mA f = 100 MHz 0.60 0.45 0.30
CW Power Dissipation Rating
Nominal Characteristics Carrier Lifetime2 S 1.0 2.0 3.0 I-Region Width mils 2 2 2
Watts 10 15 15
500 500 500
Notes: 1. The minimum specified VR (Reverse Voltage ) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A. 2. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA 3. To order this part in a package other than 30, use the prefix MA4P505 followed by a dash and the desired package style.
Package Options
Consult the Package Availability Table in the "Ordering Information" section (pg. 7) for part number choices.
Thru Hole
30
31
36
111
120,255
186
144
258
131, 212
Package dimensions can be found on the M/A-COM website at http://www.macomtech.com/TechApps/OutlineDrawings.asp
500V MELF PIN Diode Specifications (TAMB = +25C)
Minimum Reverse Voltage1 IR <10A Volts MA4P504-1072T MA4P505-1072T MA4P506-1072T Notes:
1. The minimum specified VR (Reverse Voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A. 2. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA
Specifications subject to change without prior notification.
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
Part Number
Maximum Capacitance CT @100V f = 1 MHz pF 0.5 0.65 1.0
Maximum Series Resistance RS @100mA f = 100 MHz 0.60 0.45 0.30
CW Power Dissipation Rating
Nominal Characteristics Carrier Lifetime2 S 1.0 2.0 3.0 I-Region Width mils 2 2 2
Watts 10 15 15
500 500 500
1072 Package
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant 1000V CERMACHIP PIN Diodes Specification (TAMB = +25C)
Minimum Reverse Voltage1 IR <10A Volts MA4P604-30 MA4P606-30 MA4P607-43 1000 1000 1000 Maximum Capacitance CT @100V f = 1MHz pF 0.50 0.80 2.00 Maximum Series Resistance Rs @100mA f = 100MHz 1.00 0.70 0.40 CW Power Dissipation Rating Nominal Characteristics Carrier Lifetime2 S 3.0 4.0 5.0 I-Region Width Mils 4 4 4
Rev V.9
Part Number
Watts 15 20 25
Notes: 1. The maximum specified VR (reverse voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A 2. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA
Package Options
Consult table in "Ordering Information" section (pg. 7) for availability
30, 296
36
43
111
131, 212
255
258
Package dimensions can be found on the M/A-COM website at http://www.macomtech.com/TechApps/OutlineDrawings.asp
1500V CERMACHIP PIN Diode Specifications (TAMB = +25C)
Minimum Reverse Voltage1 IR <10A Volts MA4P709-150 1500 Maximum Capacitance Ct @100V f = 1MHz pF 3.30 Maximum Series Resistance Rs @200mA f = 100MHz 0.25 Maximum Thermal Resistance Nominal Characteristics Carrier Lifetime2 S 10.0 I-Region Width mils 7
Part Number
C/W 2
Notes: 1. The minimum specified VR (reverse voltage) is sourced and the resultant reverse leakage current, Ir, is measured to be <10A 2. Nominal carrier life time specified with diode biased at IF = +10mA , IREV = -6mA
Specifications subject to change without prior notification.
150
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant
Forward Current vs. Series Resistance MA4P202, MA4P203, MA4P303 and MA4P404 100MHz
Rev V.9
Forward Current vs. Series Resistance MA4P504, MA4P505 and MA4P506 100MHz
Series Resistance Rs ()
Forward Current (IF) Forward Current vs. Series Resistance MA4P604, MA4P606 and MA4P607 100MHz
Series Resistance Rs ()
Forward Current (IF) Forward Current vs. Series Resistance MA4P709 100MHz
Series Resistance Rs ()
Series Resistance Rs ()
Forward Current (IF)
Forward Current (IF)
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant
Rev V.9
Recommended Groups B&C Testing Per MIL-STD 750
Recommended methods and conditions for Groups B and C, TX and TXV level screening.
Recommended Screening Per MIL-STD 750
Recommended methods and conditions for TX and TXV level screening.
Inspection Storage Temperature Operating Temperature Temperature Cycling Shock Vibration Constant Acceleration Humidity
Method 1031 ---- 1051 2016 2056 2006 1021
Condition See Maximum Ratings See Maximum Ratings 5 cycles - 65C to +150C 500g's 15g's 20,000g's 10 Days
Inspection Internal Visual and / or X-Ray High Temp. Storage Thermal Shock Constant Acceleration Fine Leak Gross Leak Electrical Burn-In
Method 2072, 2076 1032 1051 2006 1071 1071 ---- 1038
Condition See Note 48 hours min. @ max. storage temp. 10 Cycles 20,000 g's, Y1 H C or E See Note See Note
Notes: 1. Conditions and details of test depend on specific model number. Information available upon request. 2. Case styles 1056 and 1088 are not military, MIL-STD-750, rated packages.
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.
Packaged PIN Diodes
RoHS Compliant Maximum Soldering Temperature
For hand soldering operation: Case Style: 144,150*,186, 258*, 1088, 1072, 1079 265C maximum for 5 seconds Case Style: 120, 255, 276 265C maximum for 5 seconds. Case Style: 30*, 31, 32, 36*, 43*, 94, 111* , 296* 225C maximum for 5 seconds.
Rev V.9
*Note:
Package styles that are threaded or have pronged ends rely on a pressure connection and do not require solder attachment but can be soldered if desired. For solder reflow profiles: Refer to application note M-538 on the M/A-COM website using the following link:
http://www.macomtech.com/Application%20Notes/pdf/M538.pdf
Ordering Information
The Packaged PIN Diode specifications shown in the tables on pages 2, 3, & 4 are for the standard style package. The standard package style is indicated by the number following the dash after the base part number. Note that the specification tables lists the total diode capacitance for the standard case style. The total capacitance for the base part in an alternative package will differ and is computed by adding the junction capacitance of the chip and the parasitic capacitance of the alternative package as defined in the Package Parasitic Capacitance table below. To compute the chip junction capacitance, subtract the total capacitance shown in the specifications tables on pages 2, 3, & 4 from the appropriate standard style package capacitance below The various base part numbers are only available in the case styles shown in the Package Availability Table below. To order, indicate the base part number followed by a dash and the desired package style. For example: The MA4P506-258 is the MA4P506 chip in the 258 style package.
Package Availability Table
Base Part Number MA4P202 MA4P203 MA4P303 MA4P404 MA4P504 MA4P505 MA4P506 MA4P604 MA4P606 MA4P607 MA4P709 MADP000015-000030 MA4PH235 MA4PH236 MA4PH237 MA4PH238 MA4PH239 MADP-000234 Available ODS Package Styles 120, 134, 276, 1056 30, 32, 94, 111, 134, 1056 32, 36, 94, 120, 186, 255, 1088 30, 31, 36, 111, 132, 258,1072T* 30, 120, 132, 144, 186, 255,1072T* 36, 131, 255, 1072T* 30, 31, 36, 131, 255, 258, 1072T* 30, 43, 131, 255, 258 30, 36, 131, 258 43, 212, 296 150 30 1072T* 1072T* 1079T* 1072T* 1079T* 10720T* (1072 package style)
Package Parasitic Capacitance
Package Style 30 31 32 36 43 94 111 120 131 132 134 144 186 212 255 258 276 296 1056 1072 1079 1088 Cap. (pF) 0.18 0.18 0.30 0.18 0.75 0.15 0.27 0.13 N/A (chip) N/A (chip) N/A (chip) 0.42 0.15 N/A (chip) 0.30 0.18 0.13 0.35 0.20 0.16 0.13 0.12
*Note: "T" after the package style number indicates tape and reel.
Tape and reel information can be found on the M/A-COM website at http://www.macomtech.com/Application%20Notes/pdf/M513.pdf Package dimensions can be found on the M/A-COM website at http://www.macomtech.com/TechApps/OutlineDrawings.asp
ADVANCED: Data Sheets contain information regarding a product M/A-COM is considering for * North America Tel: 800.366.2266 / Fax: 978.366.2266 development. Performance is based on target specifications, simulated results, and/or prototype * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM has under developVisit www.macomtech.com for additional data sheets and product information. ment. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. Commitment to produce in M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make volume is not guaranteed.
changes to the product(s) or information contained herein without notice.

▲Up To Search▲

Price & Availability of MADP000015-000030

	To Download MADP000015-000030 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .